Milling Tools

Note: A gold star above a material icon indicates Fantastic performance. Icons without a star above indicate Good performance.The icon not appearing means this product is not advised/designed for machining that material.

Click a material icon from the chart below to take you straight to ranges of solid milling cutters capable of machining the material selected.

Cutters for Lower RPM Machines Solid Cutters for Low RPM Machines If you're running an older heavy duty machine or a new machine that is non-industrial there is a high probability your machine will not have great enough speeds to run performance carbide. We've collated all the best solid cutting tools in this section that will give you the best performance and price within your machine's capability.	Milling - Inserts, Bodies & Extensions Indexable Milling Bodies and Inserts High Feed Milling, Face Milling, Shoulder Milling, Profiling and Modular indexable end mill and shell milling bodies. Section also features a highly competitive range of milling inserts for machining almost any material you may encounter.	Mastermill VX Range Mastermill VX Range The Mastermill is a high performance tool in stainless steel, titanium and nickel alloys. The VX coating has been engineered to provide exceptional tool life due to multi-layer coating. With incredibly impressive test results against competitors, the Mastermill stands as one of Europa Tools strongest tools.


Mastermill AL-HPC Mastermill AL-HPC The Mastermill AL-HPC tool operate with much higher cutting conditions than the ALU-XP range and are extremely suitable for high speed machining of aluminium and non-ferrous materials. Manufactured with all three flutes centre matched, the tool itself is balanced making toolholder balancing easier and less time consuming. This tool id designed to take the heat away from the workpiece meaning heavy cuts can be taken.	HX2 - Multi Helix Milling HX2 - Multi Helix Milling Powder metallurgy end mills and roughing end mills that are highly recommended for use on steel and stainless steels. The sabre coating offers increased wear resistance at high speed machining.	Sabre Roughers/Rippers Sabre Roughers / Rippers Powder metallurgy end mills and roughing end mills that are highly recommended for use on steel and stainless steels. The sabre coating offers increased wear resistance at high speed machining.


Pulsar Blue Pulsar Blue Designed for machining hardened materials up to 70HRC. Nano grain carbide with heat resistant coating gives the Pulsar blue cutter increased tool life. It is also suitable for dry cutting and high speed cutting.	Pulsar Pulsar The Pulsar cutter is nano grain carbide designed specifically for use in dry cutting conditions. It is designed for machining up to 60HRC. Tool recommended for use on tool steels, alloy steels, mould steels and hardened materials.	Pulsar DMX Pulsar DMX Designed for high speed cutting of pre hardened steels up to HRC55. Micro grain carbide substrate for increased toughness and hardness. Pulsar DMX high performance coating boasts increased tool life in dry machining and high speed applications. The exceptional coating and new geometry give outstanding cutting ability and wear resistance.


ALU-XP ALU-XP The Alu XP tools with mirror polished flutes allow for smoother chip evacuation, giving better surface finish and wear resistance. Suitable for high speed machining of aluminium and non-ferrous materials.	Standard Carbide K30 Standard K30/General Puropse Carbide Standard carbide slot drills, end mills and roughing end mills designed for general purpose. Can be offered with TIALN coating for increased tool life and wear resistance.	ALL Solid Carbide Milling Cutters ALL Round Shank Solid Carbide Cutters Although we have separated categories by performance and price above, sometimes you might wish to compare items from different ranges with each other. If you want to compare ALL the solid carbide milling cutters we do in one section, THIS is the category you want!


Standard Cobalt Cutters Standard Cobalt Cutters The cutters in this section are your first choice for milling if you have a machine with low spindle speeds (approx 2500RPM or less). If you have an old Bridgeport or hobbyist machine these cutters will: run far better at lower speeds; be less prone to chipping (than carbide); and are much more affordable. Our Cobalt cutters are recommended for use on Steels and Aluminium.	Intermediate Cobalt Cutters Intermediate Cobalt Cutters Our range of 2 Flute Cobalt Cutters ranging from 3.0mm - 20.0mm (in 1.0mm increments).	Application Form Cutters Application Form Cutters Our range of cobalt form cutters include corner rounding, t-slot, dovetail and woodruff cutters. Supplied on a Weldon shank and recommended for use on steels, cast irons and aluminium.