DV40 ER16 Slimline Extended Collet Holder, 100mm GL, Form AD (Standard Accuracy)

£41.57

(Exc. 20% VAT)

In stock, immediate despatch

–

Part Number

OM31551

Shank Type

DV40

Adaptor Type

ER Collet Holder - Slimline Extended

Size

ER16 Collet

Through Coolant

Form AD - Coolant through Centre

Gauge Length

100mm

Accuracy

Standard - G6.3@15,000rpm

Information

ER Collet Type	Shank	Flange Diameter D6	Gauge Length GL	Through Coolant	Accuracy	Pull Stud Thread RTK
ER16	DV40	63mm	100mm	Form AD/B - Through Centre & Flange	G2.5 @ 20,000RPM	M16

About our BT/MAS403 ER Standard Slimline/Mini Extended Collet Holders:

We are proud to supply the Range of DV (DIN69871) equipment. These are supplied to G6.3 @ 15,000rpm accuracy at competitive prices.

Tests have shown, when using carbide tools our medium/high accuracy ER Collets and holders can increase tool life by up to 130%.

Slimline extended/Mini collet holders allow machining in tight spaces where the diameter of head or reach of a standard ER collet holder makes machining a challenge.

The holders are also Form AD meaning that coolant can pass through the centre of the holder directly to the job being machined.

If you need coolant provided through the flange or are unsure which option is correct for your machine please look at our holders with Form AD/B. These can be switched between coolant through the flange or through the centre of the holder by adjusting the internal screw.

Technical Data & Info