Insert
Size | Edge
Length
L | Internal /
External | Hand | Pitch (mm - TPI) | Thread
Form | Grade |
| 2 | 11 | Internal | Right
Hand | 0.5-1.5 / 48-16 | Part Profile 60 Degrees | VTX |
Dimensions (mm):
r: 0.05
X: 0.8
Y: 0.9
VTX Grade: A general purpose grade with tough submicron substrate. Provides good fracture toughness in non-rigid cutting conditions. TiAlN coated. This is Vargus's best all-round grade and will cut steels, stainless, heat resistant alloys, aluminium, plastics etc.
Toolholder: NVR..-2RH (e.g. a 10mm diameter toolholder = NVR10-2RH)
Shim:
.png)