13mm Short HSS Rotabroach Magnetic Drill Cutter

£19.43
(Exc. 20% VAT)
£43.17
Save:
55%
In stock, immediate despatch
+
Part Number
RAP130
Diameter
12mm - 19mm
Length
Short
Material
HSS
Type
Rotabroach Cutters HSS
Rotabroach
Information

Recommended for: General engineering, construction and fabrication <700N/mm2 material hardness

Diameter: 13mm

Depth of Cut: 25mm

Pilot used: SRA25 (Supplied separately)

Material: Fully ground M2 High Speed Steel (HSS) cutters

Applications: Rotabroach magnetic drill and cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil ship building and railways.

Advantages of Rotabroach cutters:
Rotabroach Cutters drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug.
Rotabroach Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds with higher metal removal rates while horsepower requirements are not increased. The geometry of Rotabroach Cutters is such that far less material is converted into chips than when using twist drills.

Far less thrust is required by Rotabroach Cutters because they do not have a dead-center area like the chisel edge region of twist drills. Thrust required is 50% of smaller diameter twist drills and 10% or less for larger diameters.

More cutting edges at work during each revolution smooths out finishes and reduces chip loads per tooth as compared to twist drills. From three to 12 teeth per cutter, depending upon diameter, helps tools last longer, even at higher feed rates.

 

Technical Data & Info
PDF 
Customer Reviews (0)

Be the first to Write a Review for this item!